curing time

英 [ˈkjʊərɪŋ taɪm] 美 [ˈkjʊrɪŋ taɪm]

固化时间;硫化时间

机械



双语例句

  1. Curing time can take hours.
    而且,其固化时间也需要数小时。
  2. Otherwise, due to the fear of endless compensation, they may choose to discard the injured within the most effective curing time or even kill them, causing more innocent lives to be lost.
    否则由于惧怕无底的赔偿,他们选择抛弃伤者,延误了最佳的治疗时间,甚至进一步杀死伤者,造成更多的无辜的生命的丧失。
  3. The effect of the curing time, the chain-extender ratio, the ATPEG molecular weight as well as the curring agent on the mechanical properties and the swelling ratio was investigated in details.
    研究了固化时间、扩链剂用量、ATPEG分子量和固化剂对该交联弹性体力学及溶胀性能的影响。
  4. Modified emulsified asphalt as a result of Slurry seal than the ordinary fast curing time, it can be modified emulsified asphalt slurry seal than the traditional thick slurry seal.
    由于改性乳化沥青稀浆比普通的稀浆封层固化时间快,所以改性乳化沥青稀浆封层可以比传统的稀浆封层厚。
  5. Objective to analyze relationships between change of flavor compounds and curing time, added salt of traditional preserved olive in the curing processing.
    研究目的:分析传统凉果原料橄榄腌制过程中风味物质的变化与腌制时间、食盐添加量的关系。
  6. Study on Curing Time Controlling of Materials Based on Isocyanate and Its Application in Transmitting Apparatus for the Wounded
    异氰酸酯基材料固化时间控制研究及在伤员固定转运器械中的应用
  7. The increasing of curing time increases the damping value, but narrows the damping temperature range.
    适当地延长固化时间可提高体系的阻尼值,但是会使阻尼温度范围变窄。
  8. In terms of technology, blended cement, curing time, equipment, finished products and other aspects the construction method utilizing high liquid plastic limit clay in road bed filling is elaborated.
    通过广西岑梧高速公路二标段路基填筑的施工实践,阐述了采用含砂高液限黏土填筑路基的施工工艺方法。
  9. Danger of material damage if specified curing time of adhesive is not observed!
    请注意胶所规定的凝固时间,否则,有材料损坏的危险!
  10. Observe curing time for adhesive.
    请遵守粘合胶的凝固时间。
  11. Effect of standard curing time during early stage on anti-carbonization capability of normal concrete;
    商品混凝土抗碳化性能是影响混凝土耐久性的一个重要方面。
  12. When there are repairs in the area of the structure bond, the vehicle may not be used until the curing time has elapsed.
    如果对结构粘接区域进行了修理,则在经过凝固时间之前不能使用车辆。
  13. During this curing time paint manufactures recommend NOT to apply a "wax" or "protectant" to the finish.
    在整修期间,漆面制造厂建议,不要使用打蜡或使用保护剂。
  14. It follows that some flavor content of salted olive increased with increasing content of added salt and curing time while some flavor content decreased.
    结论:橄榄盐坯中部分风味物质含量随食盐添加量的增加和腌制时间的延长而增加或者降低;
  15. Effects of graphite content, curing time and curing temperature on the properties of the composite were studied with orthogonal test.
    实验结果表明其固化时间均随固化剂用量的增加和固化温度的升高而缩短,且固化产物性能提高。
  16. Experiments were made by different methods of microwave plasma processing on curing time, application period, bonding strength and free formaldehyde content of UF resin.
    试验结果表明:等离子处理对脲醛树脂胶粘剂的固化时间和适用期的影响不明显;
  17. An Experiment Study on the Influence of Air Content and Curing Time on Concrete Anti-Chloride Permeability Performance
    含气量和养护龄期对混凝土抗氯离子渗透性能影响的试验研究
  18. Overview AJD-I Automatic Temperature Curing time is the struggle against traditional scald the lack of fetal development and production of premium.
    概况AJD-I型自动定时温控硫化机是针对传统电烫斗补胎的不足而研制生产的。
  19. Conclusion Preventive insertion of NIT during operation is useful in reducing gastroplegia oceurrance and shortening the curing time in the gastroplegia high risk patients.
    结论术中置入鼻肠管对胃瘫高危病人确实可以起到预防作用,同时可以缩短胃瘫的治疗时间。
  20. Modifying the curing process according to the result of the kinetic study, we are able to reduce the curing time designed by Huang in2001.
    利用反应动力学所得的结果来设计硬化过程所需的温度与时间,可大大缩短黄宏文在2001年时所设计的交联时间。
  21. The peak strain decrease with the contain of slag cement and admixtures and curing time.
    尖峰应变随著高炉水泥及掺料含量及龄期的增加而下降。
  22. The different curing time stage's Boron modified phenolic-epoxy resin was obtained by drier at170 ℃, and the experimental conversion ratio was measured by differential scanning calorimetry.
    并且采用170℃的电热鼓风干燥箱对此体系做等温固化试验,取不同固化时间的试样,用差示扫描量热仪测得树脂的实验转化率,并且与理论值进行比较。
  23. Influence of catalyst on bonding strength and curing time of bio-oil-PF resin adhesive
    催化剂对生物油-酚醛树脂胶粘剂性能的影响
  24. Low temperature and high vacuum tumble technology being widely used at home and abroad can shorten the curing time and improve product textural properties.
    低温真空滚揉能缩短腌制时间,改善产品质构,目前国内外广泛采用;
  25. The results showed that the curing time increased obviously and the curing rate decreased after the nickel coated graphite treated with silane coupling agent containing double-bond was used.
    结果表明,采用含有双键的硅烷偶联剂处理镀镍石墨后,复合材料的硫化时间明显延长,硫化速率减慢;
  26. The effects of curing time, temperature and bleeding capacity on ice-formation pressure of grout were studied.
    研究了养护温度、时间及泌水率对灌浆材料结冰压的影响。
  27. Several factors affected the strength performance and curing time of polymer concrete are also discussed.
    对影响固化时间和强度的几个因素进行了探讨。
  28. And the parameters that influenced the curing time and properties of the cured film were also discussed.
    并对漆膜光固化速度和固化膜性能的影响因素进行了探讨。
  29. The optimize curing time under different temperatures was also investigated.
    另外,对不同养护温度下土壤聚合反应的最佳养护时间也进行了研究。